Mihir Machine Tools (Gujarat) Pvt Ltd.
Mihir Machine Tools (Gujarat) Pvt Ltd.
N.H No.8/B, Rajkot, Gujarat
GST No. 24AALCM2517J1ZG
TrustSEAL Verified
Call 0804896034450% Response Rate
SEND EMAIL

Heavy Duty Lathe Machine

Manufacturer of a wide range of products which include 7 feet heavy duty all geared lathe machine, 100 mm, 9 feet heavy duty all geared lathe machine, 100 mm, 7 feet all geared head heavy duty lathe machine, 100 mm, 7 feet all geared heavy duty lathe machine, 80 mm, 9 feet all geared heavy duty lathe machine, 80 mm and 7 feet cone pulley/ belt driven heavy duty lathe machine, 75 mm.

7 Feet Heavy Duty All Geared Lathe Machine, 100 mm

7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 7 Feet Heavy Duty All Geared Lathe Machine, 100 mm
Get Best Quote
Approx. Price: Rs 4 Lakh / PieceGet Latest Price

Product Details:

Bed Length7 Feet
Height of Centre450 mm
Swing Over Bed800 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Paper Mills, Steel Rolling Mills, Shipbuilding, Textile, Mining, Oil Industry
Bed Width450 mm
Number of Spindle Speeds9
Distance Between Centre1000 mm
Swing Over Cross Slide600 mm
Maximum Swing in Gap950 mm
Cross Slide Travel450 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter75 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight2500 kg
Floor Space2700 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2 V & 2 Flat

Model No. MIHIR - 450 x 1000

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

9 Feet Heavy Duty All Geared Lathe Machine, 100 mm

9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 9 Feet Heavy Duty All Geared Lathe Machine, 100 mm
Get Best Quote
Approx. Price: Rs 6.8 Lakh / PieceGet Latest Price

Product Details:

Bed Length9 Feet
Height of Centre450 mm
Swing Over Bed800 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width450 mm
Number of Spindle Speeds9
Distance Between Centre1500 mm
Swing Over Cross Slide600 mm
Maximum Swing in Gap950 mm
Cross Slide Travel450 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter75 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight3000 kg
Floor Space2900 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2V & 2 Flat

Model No. MIHIR - 450 x 1500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm

7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 7 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
Get Best Quote
Approx. Price: Rs 5.53 Lakh / PieceGet Latest Price

Product Details:

Bed Length7 Feet
Height of Centre375 mm
Swing Over Bed650 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Paper Mills, Steel Rolling Mills, Shipbuilding, Textile, Mining, Tool Room, Oil Industry
Bed Width375 mm
Number of Spindle Speeds9
Distance Between Centre1000 mm
Swing Over Cross Slide450 mm
Maximum Swing in Gap950 mm
Cross Slide Travel375 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight1800 kg
Floor Space2700 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2V & 2 Flat

Model No. MIHIR - 375 x 1000

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

7 Feet All Geared Heavy Duty Lathe Machine, 80 mm

7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 7 Feet All Geared Heavy Duty Lathe Machine, 80 mm
Get Best Quote
Approx. Price: Rs 4.67 Lakh / PieceGet Latest Price

Product Details:

Bed Length7 Feet
Height of Centre300 mm
Swing Over Bed580 mm
Spindle Bore80 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPaper Mills, Steel Rolling Mills, Sugar Mills, Textile, Mining, Tool Room
Bed Width325 mm
Number of Spindle Speeds9
Distance Between Centre1000 mm
Swing Over Cross Slide380 mm
Maximum Swing in Gap825 mm
Cross Slide Travel300 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power3 HP
Machine Weight1500 kg
Floor Space2400 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2 V & 2 Flat

Model No. MIHIR - 300 x 1000

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

9 Feet All Geared Heavy Duty Lathe Machine, 80 mm

9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 9 Feet All Geared Heavy Duty Lathe Machine, 80 mm
Get Best Quote
Approx. Price: Rs 4.93 Lakh / PieceGet Latest Price

Product Details:

Bed Length9 Feet
Height of Centre300 mm
Swing Over Bed580 mm
Spindle Bore80 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width325 mm
Number of Spindle Speeds9
Distance Between Centre1500 mm
Swing Over Cross Slide380 mm
Maximum Swing in Gap825 mm
Cross Slide Travel300 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power3 HP
Machine Weight1700 kg
Floor Space2900 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2 V & 2 Flat

Model No. MIHIR - 300 x 1500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm

7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 7 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
Get Best Quote
Approx. Price: Rs 2.8 Lakh / PieceGet Latest Price

Product Details:

Bed Length7 Feet
Height of Centre300 mm
Swing Over Bed585 mm
Spindle Bore75 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Paper Mills, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width375 mm
Number of Spindle Speeds8
Distance Between Centre1000 mm
Swing Over Cross Slide390 mm
Maximum Swing in Gap890 mm
Cross Slide Travel215 mm
Spindle Speed Range35-300 RPM
Lead Screw Diameter38 mm
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power3 HP
Machine Weight1300 kg

Model No. MIHIR - 300 x 1000

Special Features:
  • Bed is made from 25 Grade Cast iron of 400 BHN hardened, strictly inspected with Micro level, Hardness Tester and Straight Edge with 4 “V” type bed.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel with front DOUBLE BEARING.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • DOUBLE SCREW NORTON GEAR BOX:- Provided as time Server equipment with Separate Thread & Feed Shaft.Thus,feed & Thread gears could be changed Repidlly and decreases the water and tear in Half nut & Lead Screw
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:

  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Motor Pully
  • Four Position Tool Post

Extra Accessories:
  • Dog or True Chuck
  • Electric Motor & V-Belt with Electricals
  • Coolant Pump,Tank and Nozzle
  • Quick Change Tool Post / Rear Tool Post
  • Reverse – Forward Switch
  • Steady Rest
  • Follow Rest
  • Face Plate
  • Splesh Guard
  • Machine Lamp
Request
Callback
Yes! I am Interested

9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm

9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
  • 9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
  • 9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
  • 9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
  • 9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
  • 9 Feet All Geared Head Heavy Duty Lathe Machine, 100 Mm
Get Best Quote
Approx. Price: Rs 5.78 Lakh / PieceGet Latest Price

Product Details:

Bed Length9 Feet
Height of Centre375 mm
Swing Over Bed650 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Oil Industry
Bed Width375 mm
Number of Spindle Speeds9
Distance Between Centre1500 mm
Swing Over Cross Slide450 mm
Maximum Swing in Gap950 mm
Cross Slide Travel375 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight2000 kg
Floor Space2900 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2V & 2 Flat

Model No. MIHIR - 375 x 1500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm

7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 7 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
Get Best Quote
Approx. Price: Rs 2.96 Lakh / PieceGet Latest Price

Product Details:

Bed Length7 Feet
Height of Centre254 mm
Swing Over Bed490 mm
Spindle Bore52 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Tool Room
Bed Width325 mm
Number of Spindle Speeds8
Distance Between Centre1000 mm
Swing Over Cross Slide290 mm
Maximum Swing in Gap800 mm
Cross Slide Travel265 mm
Spindle Speed Range25-250 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power3 HP
Machine Weight1200 kg
Floor Space2600 x 950 x 1400 mm
Country of OriginMade in India
Range of Inch Thread1-24 T.P.I
Range of Metric Thread1-6 mm
Bed Type2V & 2 Flat

Model No. MIHIR - 250 x 1000

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal griding.

Standard Accessories:

  • Norton Gear Box
  • 350.mm 4 Jaw Chuck
  • 250.mm 3 Jaw Chuck
  • 3.HP 3Ph. Motor
  • Gear Set(Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pulley

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

12 Feet Heavy Duty All Geared Lathe Machine, 100 mm

12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
  • 12 Feet Heavy Duty All Geared Lathe Machine, 100 mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length12 Feet
Height of Centre450 mm
Swing Over Bed800 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry, Gas Industry
Bed Width450 mm
Number of Spindle Speeds9
Distance Between Centre2500 mm
Swing Over Cross Slide600 mm
Maximum Swing in Gap950 mm
Cross Slide Travel450 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter75 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight3500 kg
Floor Space4200 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2V & 2 Flat

Model No. MIHIR - 450 x 2500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm

9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
  • 9 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 Mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length9 Feet
Height of Centre254 mm
Swing Over Bed490 mm
Spindle Bore52 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width325 mm
Number of Spindle Speeds8
Distance Between Centre1500 mm
Swing Over Cross Slide290 mm
Maximum Swing in Gap800 mm
Cross Slide Travel265 mm
Spindle Speed Range25-250 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power3 HP
Machine Weight1400 kg
Floor Space3200 x 950 x 1400 mm
Country of OriginMade in India
Range of Inch Thread1-24 T.P.I
Range of Metric Thread1-6 mm
Bed Type2V & 2 Flat

Model No. MIHIR - 250 x 1500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal griding.

Standard Accessories:

  • Norton Gear Box
  • 350.mm 4 Jaw Chuck
  • 250.mm 3 Jaw Chuck
  • 3.HP 3Ph. Motor
  • Gear Set(Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pulley

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

12 Feet All Geared Heavy Duty Lathe Machine, 80 mm

12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
  • 12 Feet All Geared Heavy Duty Lathe Machine, 80 mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length12 Feet
Height of Centre300 mm
Swing Over Bed580 mm
Spindle Bore80 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Shipbuilding, Oil Industry, Gas Industry
Bed Width325 mm
Number of Spindle Speeds9
Distance Between Centre2500 mm
Swing Over Cross Slide380 mm
Maximum Swing in Gap825 mm
Cross Slide Travel300 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power5 HP
Machine Weight2200 kg
Floor Space4200 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2 V & 2 Flat

Model No. MIHIR - 300 x 2500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm

12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
  • 12 Feet All Geared Head Heavy Duty Lathe Machine, 100 mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length12 Feet
Height of Centre375 mm
Swing Over Bed650 mm
Spindle Bore100 mm
Machine TypeAll Geared Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width375 mm
Number of Spindle Speeds9
Distance Between Centre2500 mm
Swing Over Cross Slide450 mm
Maximum Swing in Gap950 mm
Cross Slide Travel375 mm
Spindle Speed Range20-500 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight2500 kg
Floor Space4200 x 1200 x 1500 mm
Country of OriginMade in India
Bed Type2V & 2 Flat

Model No. MIHIR - 375 x 2500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • HEAD STOCK is totally enclosed oil bath system & gear made from 20 Mn Cr5 Hardened
  • Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:
  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pully

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm

5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm
  • 5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm
  • 5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm
  • 5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm
  • 5.6 Feet Heavy Duty Cone Pulley/ Belt Driven Lathe Machine, 52 mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length5.6 Feet
Height of Centre254 mm
Swing Over Bed490 mm
Spindle Bore52 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPaper Mills, Steel Rolling Mills, Sugar Mills, Textile, Mining, Tool Room
Bed Width325 mm
Number of Spindle Speeds8
Distance Between Centre500 mm
Swing Over Cross Slide290 mm
Maximum Swing in Gap800 mm
Cross Slide Travel265 mm
Spindle Speed Range25-250 RPM
Lead Screw Diameter38 mm
Lead Screw Pitch2 T.P.I
Tail Stock Spindle Diameter57 mm
Tail Stock Spindle Taper BoreMT-4
Tail Stock Spindle Travel180 mm
Motor Power3 HP
Machine Weight1000 kg
Floor Space2150 x 950 x 1400 mm
Country of OriginMade in India
Range of Inch Thread1-24 T.P.I
Range of Metric Thread1-6 mm
Bed Type2V & 2 Flat

Model No. MIHIR - 250 x 500

Special Features:
  • Bed is made from 25 Grade Cast lron of 400 BHN hardened, strictly inspected with Microlevel, Hardness Tester and Straight Edge.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal griding.

Standard Accessories:

  • Norton Gear Box
  • 350.mm 4 Jaw Chuck
  • 250.mm 3 Jaw Chuck
  • 3.HP 3Ph. Motor
  • Gear Set(Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Four Position Tool Post
  • Thread Dial Indicator
  • Motor Stand
  • Motor Pulley

Extra Accessories:
  • True Chuck
  • Dog Chuck
  • Driving Plate
  • Face Plate
  • Steady Rest
  • Follow Rest
  • Quich Change Tool Post
  • Rear Tool Post
  • Splesh Guard
  • Revolving Centre

Electric Equipment:
  • Motor & Swich
  • Two Speed Motor
  • Variable Speed Motor
  • Brack Motor
  • Coolant Fittings
  • Machine Lamp
  • Control panel Bord
Request
Callback
Yes! I am Interested

12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm

12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 12 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length12 Feet
Height of Centre300 mm
Swing Over Bed585 mm
Spindle Bore75 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Mining, Oil Industry
Bed Width375 mm
Number of Spindle Speeds8
Distance Between Centre2400 mm
Swing Over Cross Slide390 mm
Maximum Swing in Gap890 mm
Cross Slide Travel215 mm
Spindle Speed Range35-300 RPM
Lead Screw Diameter38 mm
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight1800 kg
Country of OriginMade in India

Model No. MIHIR - 300 x 2400

Special Features:
  • Bed is made from 25 Grade Cast iron of 400 BHN hardened, strictly inspected with Micro level, Hardness Tester and Straight Edge with 4 “V” type bed.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel with front DOUBLE BEARING.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • DOUBLE SCREW NORTON GEAR BOX:- Provided as time Server equipment with Separate Thread & Feed Shaft.Thus,feed & Thread gears could be changed Repidlly and decreases the water and tear in Half nut & Lead Screw
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:

  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Motor Pully
  • Four Position Tool Post

Extra Accessories:
  • Dog or True Chuck
  • Electric Motor & V-Belt with Electricals
  • Coolant Pump,Tank and Nozzle
  • Quick Change Tool Post / Rear Tool Post
  • Reverse – Forward Switch
  • Steady Rest
  • Follow Rest
  • Face Plate
  • Splesh Guard
  • Machine Lamp
Request
Callback
Yes! I am Interested

9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm

9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
  • 9 Feet Cone Pulley/ Belt Driven Heavy Duty Lathe Machine, 75 Mm
Ask For Price
Product Price :Get Latest Price

Product Details:

Bed Length9 Feet
Height of Centre300 mm
Swing Over Bed585 mm
Spindle Bore75 mm
Machine TypeBelt Driven Heavy Duty Lathe Machine
Applicable IndustryPower Plant, Steel Rolling Mills, Shipbuilding, Textile, Mining, Oil Industry
Bed Width375 mm
Number of Spindle Speeds8
Distance Between Centre1500 mm
Swing Over Cross Slide390 mm
Maximum Swing in Gap890 mm
Cross Slide Travel215 mm
Spindle Speed Range35-300 RPM
Lead Screw Diameter38 mm
Tail Stock Spindle Diameter70 mm
Tail Stock Spindle Taper BoreMT-5
Tail Stock Spindle Travel200 mm
Motor Power5 HP
Machine Weight1500 kg
Country of OriginMade in India

Model No. MIHIR - 300 x 1500

Special Features:
  • Bed is made from 25 Grade Cast iron of 400 BHN hardened, strictly inspected with Micro level, Hardness Tester and Straight Edge with 4 “V” type bed.
  • Boring of Head Stock is done on WMW boring machine fitted with induction hardened and ground Spindle made from alloy steel with front DOUBLE BEARING.
  • Apron is totally enclosed oil bath system with lever type arrangement for automatic feeds.
  • DOUBLE SCREW NORTON GEAR BOX:- Provided as time Server equipment with Separate Thread & Feed Shaft.Thus,feed & Thread gears could be changed Repidlly and decreases the water and tear in Half nut & Lead Screw
  • Hexagonal Shaped Tail Stock with hardened and ground tail stock Spindle made from alloy steel having external and internal grinding.

Standard Accessories:

  • Change Gear Set
  • (Inch & mm)
  • Chuck Plate
  • Tool Post Key
  • Center Adaptor
  • Dead Centre (2 Nos.)
  • Motor Pully
  • Four Position Tool Post

Extra Accessories:
  • Dog or True Chuck
  • Electric Motor & V-Belt with Electricals
  • Coolant Pump,Tank and Nozzle
  • Quick Change Tool Post / Rear Tool Post
  • Reverse – Forward Switch
  • Steady Rest
  • Follow Rest
  • Face Plate
  • Splesh Guard
  • Machine Lamp
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Ravi Dusara (Manager)
Mihir Machine Tools (Gujarat) Pvt Ltd.
Survey No.34, Plot No.7, Dharti Gate, N.H No.8/B, Rajkot - 360024, Gujarat, India


Call Us


Send E-mail